patch-2.2.18 linux/drivers/net/skfp/h/smtstate.h

• Lines: 101
• Date: Fri Sep 1 13:48:23 2000
• Orig file: v2.2.17/drivers/net/skfp/h/smtstate.h
• Orig date: Thu Jan 1 01:00:00 1970

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/net/skfp/h/smtstate.h linux/drivers/net/skfp/h/smtstate.h
@@ -0,0 +1,100 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	SMT state definitions
+ */
+
+#ifndef	KERNEL
+/*
+ * PCM states
+ */
+#define PC0_OFF			0
+#define PC1_BREAK		1
+#define PC2_TRACE		2
+#define PC3_CONNECT		3
+#define PC4_NEXT		4
+#define PC5_SIGNAL		5
+#define PC6_JOIN		6
+#define PC7_VERIFY		7
+#define PC8_ACTIVE		8
+#define PC9_MAINT		9
+
+/*
+ * PCM modes
+ */
+#define PM_NONE			0
+#define PM_PEER			1
+#define PM_TREE			2
+
+/*
+ * PCM type
+ */
+#define TA			0
+#define TB			1
+#define TS			2
+#define TM			3
+#define TNONE			4
+
+/*
+ * CFM states
+ */
+#define SC0_ISOLATED	0		/* isolated */
+#define SC1_WRAP_A	5		/* wrap A */
+#define SC2_WRAP_B	6		/* wrap B */
+#define SC4_THRU_A	12		/* through A */
+#define SC5_THRU_B	7		/* through B (SMt 6.2) */
+#define SC7_WRAP_S	8		/* SAS */
+
+/*
+ * ECM states
+ */
+#define EC0_OUT		0
+#define EC1_IN		1
+#define EC2_TRACE	2
+#define EC3_LEAVE	3
+#define EC4_PATH_TEST	4
+#define EC5_INSERT	5
+#define EC6_CHECK	6
+#define EC7_DEINSERT	7
+
+/*
+ * RMT states
+ */
+#define RM0_ISOLATED	0
+#define RM1_NON_OP	1		/* not operational */
+#define RM2_RING_OP	2		/* ring operational */
+#define RM3_DETECT	3		/* detect dupl addresses */
+#define RM4_NON_OP_DUP	4		/* dupl. addr detected */
+#define RM5_RING_OP_DUP	5		/* ring oper. with dupl. addr */
+#define RM6_DIRECTED	6		/* sending directed beacons */
+#define RM7_TRACE	7		/* trace initiated */
+#endif
+
+struct pcm_state {
+	unsigned char	pcm_type ;		/* TA TB TS TM */
+	unsigned char	pcm_state ;		/* state PC[0-9]_* */
+	unsigned char	pcm_mode ;		/* PM_{NONE,PEER,TREE} */
+	unsigned char	pcm_neighbor ;		/* TA TB TS TM */
+	unsigned char	pcm_bsf ;		/* flag bs : TRUE/FALSE */
+	unsigned char	pcm_lsf ;		/* flag ls : TRUE/FALSE */
+	unsigned char	pcm_lct_fail ;		/* counter lct_fail */
+	unsigned char	pcm_ls_rx ;		/* rx line state */
+	short		pcm_r_val ;		/* signaling bits */
+	short		pcm_t_val ;		/* signaling bits */
+} ;
+
+struct smt_state {
+	struct pcm_state pcm_state[NUMPHYS] ;	/* port A & port B */
+} ;