patch-2.2.18 linux/arch/arm/nwfpe/fpa11.c

• Lines: 207
• Date: Fri Sep 15 23:28:37 2000
• Orig file: v2.2.17/arch/arm/nwfpe/fpa11.c
• Orig date: Thu Jan 1 01:00:00 1970

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/arch/arm/nwfpe/fpa11.c linux/arch/arm/nwfpe/fpa11.c
@@ -0,0 +1,206 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Corel Computer Corporation, 1998
+
+    Direct questions, comments to Scott Bambrough <scottb@corelcomputer.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "config.h"
+#include "fpa11.h"
+#include "milieu.h"
+#include "fpopcode.h"
+
+#include "fpmodule.h"
+#include "fpmodule.inl"
+
+/* forward declarations */
+unsigned int EmulateCPDO(const unsigned int);
+unsigned int EmulateCPDT(const unsigned int);
+unsigned int EmulateCPRT(const unsigned int);
+
+/* Emulator registers */
+FPA11 *fpa11;
+
+/* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
+void resetFPA11(void)
+{
+  int i;
+  /* initialize the registers */
+  for (i=0;i<=7;i++)
+  {
+    fpa11->fpreg[i].fType = typeNone;
+  }
+  
+  /* FPSR: set system id to FP_EMULATOR, clear all other bits */
+  fpa11->fpsr = FP_EMULATOR;
+  
+  /* FPCR: set SB, AB and DA bits, clear all others */
+#if MAINTAIN_FPCR         
+  fpa11->fpcr = MASK_RESET;
+#endif
+}
+
+void SetRoundingMode(const unsigned int opcode)
+{
+#if MAINTAIN_FPCR
+   fpa11->fpcr &= ~MASK_ROUNDING_MODE;
+#endif   
+   switch (opcode & MASK_ROUNDING_MODE)
+   {
+      default:
+      case ROUND_TO_NEAREST:
+         float_rounding_mode = float_round_nearest_even;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_TO_NEAREST;
+#endif         
+      break;
+      
+      case ROUND_TO_PLUS_INFINITY:
+         float_rounding_mode = float_round_up;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_TO_PLUS_INFINITY;
+#endif         
+      break;
+      
+      case ROUND_TO_MINUS_INFINITY:
+         float_rounding_mode = float_round_down;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_TO_MINUS_INFINITY;
+#endif         
+      break;
+      
+      case ROUND_TO_ZERO:
+         float_rounding_mode = float_round_to_zero;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_TO_ZERO;
+#endif         
+      break;
+  }
+}
+
+void SetRoundingPrecision(const unsigned int opcode)
+{
+#if MAINTAIN_FPCR
+   fpa11->fpcr &= ~MASK_ROUNDING_PRECISION;
+#endif   
+   switch (opcode & MASK_ROUNDING_PRECISION)
+   {
+      case ROUND_SINGLE:
+         floatx80_rounding_precision = 32;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_SINGLE;
+#endif         
+      break;
+      
+      case ROUND_DOUBLE:
+         floatx80_rounding_precision = 64;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_DOUBLE;
+#endif         
+      break;
+      
+      case ROUND_EXTENDED:
+         floatx80_rounding_precision = 80;
+#if MAINTAIN_FPCR         
+         fpa11->fpcr |= ROUND_EXTENDED;
+#endif         
+      break;
+      
+      default: floatx80_rounding_precision = 80;
+  }
+}
+
+/* Emulate the instruction in the opcode. */
+unsigned int EmulateAll(unsigned int opcode)
+{
+  unsigned int nRc = 0;
+
+  if (fpa11->initflag == 0)		/* good place for __builtin_expect */
+  {
+    resetFPA11();
+    SetRoundingMode(ROUND_TO_NEAREST);
+    SetRoundingPrecision(ROUND_EXTENDED);
+    fpa11->initflag = 1;
+  }
+
+  if (TEST_OPCODE(opcode,MASK_CPRT))
+  {
+    /* Emulate conversion opcodes. */
+    /* Emulate register transfer opcodes. */
+    /* Emulate comparison opcodes. */
+    nRc = EmulateCPRT(opcode);
+  }
+  else if (TEST_OPCODE(opcode,MASK_CPDO))
+  {
+    /* Emulate monadic arithmetic opcodes. */
+    /* Emulate dyadic arithmetic opcodes. */
+    nRc = EmulateCPDO(opcode);
+  }
+  else if (TEST_OPCODE(opcode,MASK_CPDT))
+  {
+    /* Emulate load/store opcodes. */
+    /* Emulate load/store multiple opcodes. */
+    nRc = EmulateCPDT(opcode);
+  }
+  else
+  {
+    /* Invalid instruction detected.  Return FALSE. */
+    nRc = 0;
+  }
+
+  return(nRc);
+}
+
+#if 0
+unsigned int EmulateAll1(unsigned int opcode)
+{
+  switch ((opcode >> 24) & 0xf)
+  {
+     case 0xc:
+     case 0xd:
+       if ((opcode >> 20) & 0x1)
+       {
+          switch ((opcode >> 8) & 0xf)
+          {
+             case 0x1: return PerformLDF(opcode); break;
+             case 0x2: return PerformLFM(opcode); break;
+             default: return 0;
+          }
+       }
+       else
+       {
+          switch ((opcode >> 8) & 0xf)
+          {
+             case 0x1: return PerformSTF(opcode); break;
+             case 0x2: return PerformSFM(opcode); break;
+             default: return 0;
+          }
+      }
+     break;
+     
+     case 0xe: 
+       if (opcode & 0x10)
+         return EmulateCPDO(opcode);
+       else
+         return EmulateCPRT(opcode);
+     break;
+  
+     default: return 0;
+  }
+}
+#endif
+