patch-2.4.20 linux-2.4.20/arch/ppc/platforms/mbx.h

• Lines: 99
• Date: Thu Nov 28 15:53:11 2002
• Orig file: linux-2.4.19/arch/ppc/platforms/mbx.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.19/arch/ppc/platforms/mbx.h linux-2.4.20/arch/ppc/platforms/mbx.h
@@ -0,0 +1,98 @@
+/*
+ * BK Id: SCCS/s.mbx.h 1.11 08/17/01 15:23:17 paulus
+ */
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Motorola MBX boards.  This was originally created for the
+ * MBX860, and probably needs revisions for other boards (like the 821).
+ * When this file gets out of control, we can split it up into more
+ * meaningful pieces.
+ *
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ */
+#ifdef __KERNEL__
+#ifndef __MACH_MBX_DEFS
+#define __MACH_MBX_DEFS
+
+#ifndef __ASSEMBLY__
+/* A Board Information structure that is given to a program when
+ * EPPC-Bug starts it up.
+ */
+typedef struct bd_info {
+	unsigned int	bi_tag;		/* Should be 0x42444944 "BDID" */
+	unsigned int	bi_size;	/* Size of this structure */
+	unsigned int	bi_revision;	/* revision of this structure */
+	unsigned int	bi_bdate;	/* EPPCbug date, i.e. 0x11061997 */
+	unsigned int	bi_memstart;	/* Memory start address */
+	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
+	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
+	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
+	unsigned int	bi_clun;	/* Boot device controller */
+	unsigned int	bi_dlun;	/* Boot device logical dev */
+
+	/* These fields are not part of the board information structure
+	 * provided by the boot rom.  They are filled in by embed_config.c
+	 * so we have the information consistent with other platforms.
+	 */
+	unsigned char	bi_enetaddr[6];
+	unsigned int	bi_baudrate;
+} bd_t;
+
+/* Memory map for the MBX as configured by EPPC-Bug.  We could reprogram
+ * The SIU and PCI bridge, and try to use larger MMU pages, but the
+ * performance gain is not measureable and it certainly complicates the
+ * generic MMU model.
+ *
+ * In a effort to minimize memory usage for embedded applications, any
+ * PCI driver or ISA driver must request or map the region required by
+ * the device.  For convenience (and since we can map up to 4 Mbytes with
+ * a single page table page), the MMU initialization will map the
+ * NVRAM, Status/Control registers, CPM Dual Port RAM, and the PCI
+ * Bridge CSRs 1:1 into the kernel address space.
+ */
+#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
+#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
+#define PCI_IDE_ADDR		((unsigned)0x81000000)
+#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
+#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
+#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024 * 1024))
+#define PCMCIA_DMA_ADDR		((uint)0xe4000000)
+#define PCMCIA_DMA_SIZE		((uint)(64 * 1024 * 1024))
+#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
+#define PCMCIA_ATTRB_SIZE	((uint)(64 * 1024 * 1024))
+#define PCMCIA_IO_ADDR		((uint)0xec000000)
+#define PCMCIA_IO_SIZE		((uint)(64 * 1024 * 1024))
+#define NVRAM_ADDR		((uint)0xfa000000)
+#define NVRAM_SIZE		((uint)(1 * 1024 * 1024))
+#define MBX_CSR_ADDR		((uint)0xfa100000)
+#define MBX_CSR_SIZE		((uint)(1 * 1024 * 1024))
+#define IMAP_ADDR		((uint)0xfa200000)
+#define IMAP_SIZE		((uint)(64 * 1024))
+#define PCI_CSR_ADDR		((uint)0xfa210000)
+#define PCI_CSR_SIZE		((uint)(64 * 1024))
+
+/* Map additional physical space into well known virtual addresses.  Due
+ * to virtual address mapping, these physical addresses are not accessible
+ * in a 1:1 virtual to physical mapping.
+ */
+#define ISA_IO_VIRT_ADDR	((uint)0xfa220000)
+#define ISA_IO_VIRT_SIZE	((uint)64 * 1024)
+
+/* Interrupt assignments.
+ * These are defined (and fixed) by the MBX hardware implementation.
+ */
+#define POWER_FAIL_INT	SIU_IRQ0	/* Power fail */
+#define TEMP_HILO_INT	SIU_IRQ1	/* Temperature sensor */
+#define QSPAN_INT	SIU_IRQ2	/* PCI Bridge (DMA CTLR?) */
+#define ISA_BRIDGE_INT	SIU_IRQ3	/* All those PC things */
+#define COMM_L_INT	SIU_IRQ6	/* MBX Comm expansion connector pin */
+#define STOP_ABRT_INT	SIU_IRQ7	/* Stop/Abort header pin */
+#endif /* !__ASSEMBLY__ */
+
+/* The MBX uses the 8259.
+*/
+#define NR_8259_INTS	16
+
+#endif
+#endif /* __KERNEL__ */