patch-1.3.87 linux/drivers/scsi/53c7,8xx.scr

Next file: linux/drivers/scsi/53c8xx_d.h
Previous file: linux/drivers/scsi/53c7,8xx.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.86/linux/drivers/scsi/53c7,8xx.scr linux/drivers/scsi/53c7,8xx.scr
@@ -128,7 +128,7 @@
 ; loaded with the address of the next DSA structure and
 ; reselected_check_next is called if a failure occurs.
 ;
-; Perhaps more conscisely, the net effect of the mess is 
+; Perhaps more concisely, the net effect of the mess is 
 ;
 ; for (dsa = reconnect_dsa_head, dest = &reconnect_dsa_head, 
 ;     src = NULL; dsa; dest = &dsa->next, dsa = dsa->next) {
@@ -224,7 +224,7 @@
 ENTRY dsa_code_check_reselect
 dsa_code_check_reselect:
 	MOVE SSID TO SFBR		; SSID contains 3 bit target ID
-; FIXME : we need to accomodate bit fielded and binary here for '7xx/'8xx chips
+; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips
 	JUMP REL (wrong_dsa), IF NOT dsa_temp_target, AND MASK 0xf8
 ;
 ; Hack - move to scratch first, since SFBR is not writeable
@@ -234,7 +234,7 @@
 	MOVE MEMORY 1, reselected_identify, addr_scratch
 	MOVE dmode_memory_to_memory TO DMODE
 	MOVE SCRATCH0 TO SFBR
-; FIXME : we need to accomodate bit fielded and binary here for '7xx/'8xx chips
+; FIXME : we need to accommodate bit fielded and binary here for '7xx/'8xx chips
 	JUMP REL (wrong_dsa), IF NOT dsa_temp_lun, AND MASK 0xf8
 ;		Patch the MOVE MEMORY INSTRUCTION such that
 ;		the source address is the address of this dsa's
@@ -281,7 +281,7 @@
 
 ; Linked lists of DSA structures
 ABSOLUTE reconnect_dsa_head = 0	; Link list of DSAs which can reconnect
-ABSOLUTE addr_reconnect_dsa_head = 0 ; Address of variable contataining
+ABSOLUTE addr_reconnect_dsa_head = 0 ; Address of variable containing
 				; address of reconnect_dsa_head
 
 ; These select the source and destination of a MOVE MEMORY instruction
@@ -571,7 +571,7 @@
 ;
 ;	After control has passed to one of the user provided 
 ;	DATA_IN or DATA_OUT routines, back calls are made to 
-;	other_tranfer_in or other_transfer_out to handle non-DATA IN
+;	other_transfer_in or other_transfer_out to handle non-DATA IN
 ;	and DATA OUT phases respectively, with the state of the active
 ;	data pointer being preserved in TEMP.
 ;
@@ -648,7 +648,7 @@
 
 
 ; Note that other_out and other_in loop until a non-data phase
-; is discoverred, so we only execute return statements when we
+; is discovered, so we only execute return statements when we
 ; can go on to the next data phase block move statement.
 
 ENTRY other_out
@@ -697,7 +697,7 @@
 ;	caller hasn't read the first byte of the message.  munge_message
 ;	is called when the caller has read the first byte of the message,
 ;	and left it in SFBR.  msg_in_restart is called when the caller 
-;	hasnt read the first byte of the message, and wishes RETURN
+;	hasn't read the first byte of the message, and wishes RETURN
 ;	to transfer control back to the address of the conditional
 ;	CALL instruction rather than to the instruction after it.
 ;
@@ -1110,7 +1110,7 @@
 ;
 ; 2.  The NCR53c810 was selected or reselected by another device.
 ;
-; 3.  The bus was allready busy since we were selected or reselected
+; 3.  The bus was already busy since we were selected or reselected
 ;	before starting the command.
 
 wait_reselect_failed:
@@ -1234,7 +1234,7 @@
 ; so we need to sink/source one byte of data to allow the transition.
 ;
 ; For the sake of safety, we'll only source one byte of data in all 
-; cases, but to accomodate the SCSI-I dain bramage, we'll sink an  
+; cases, but to accommodate the SCSI-I dain bramage, we'll sink an  
 ; arbitrary number of bytes.
     JUMP spew_cmd, WHEN CMD
     JUMP eat_msgin, WHEN MSG_IN

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this