patch-1.3.87 linux/Documentation/isdn/README

• Lines: 29
• Date: Fri Apr 12 09:49:29 1996
• Orig file: v1.3.86/linux/Documentation/isdn/README
• Orig date: Mon Feb 26 11:58:03 1996

diff -u --recursive --new-file v1.3.86/linux/Documentation/isdn/README linux/Documentation/isdn/README
@@ -270,7 +270,7 @@
        ATTENTION:
 
        Due to limited hardware-capabilities, there is no way to check the
-       existence of a card. Therefore you need to be shure your card's setup
+       existence of a card. Therefore you need to be sure your card's setup
        is correct. Also there are bugs in the printed manual of some newer
        16.3 cards. The manual tells the port has to be 0x180. THIS IS WRONG!!
        0xd80 is the correct value! Have a look to the kernel-syslog. With
@@ -317,7 +317,7 @@
 
          m0,i0,p0,d0 ... mn,in,pn,dn have the same meanings like the
                                      parameters described for the kernel-
-                                     version above. Watchout: different
+                                     version above. Watch out: different
                                      sequence!
 
      3.2.2 ICN driver.
@@ -369,8 +369,8 @@
      the card must be appended to the command line.
 
      -> The two LEDs at the back cover of the card (ICN-2B: 4 LEDs) must be
-        blinking intermittingly now. If a connection is up, the corresponding
-        led lits continuously.
+        blinking intermittently now. If a connection is up, the corresponding
+        led is lit continuously.
 
    b) If you only intend to use ttys, you are nearly ready now.