patch-1.3.48 linux/arch/mips/kernel/pica.S

Next file: linux/arch/mips/kernel/process.c
Previous file: linux/arch/mips/kernel/magnum4000.S
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.47/linux/arch/mips/kernel/pica.S linux/arch/mips/kernel/pica.S
@@ -0,0 +1,268 @@
+/*
+ * arch/mips/kernel/pica.S
+ *
+ * Copyright (C) 1995 Waldorf Electronics
+ * written by Ralf Baechle and Andreas Busse
+ *
+ * Acer PICA 61 specific stuff
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/jazz.h>
+#include <asm/pica.h>
+#include <asm/stackframe.h>
+
+/*
+ * acer_pica_61_handle_int: Interrupt handler for the ACER Pica-61 boards
+ * FIXME: this is *very* experimental!
+ */
+		.set	noreorder
+
+		NESTED(acer_pica_61_handle_int, FR_SIZE, ra)
+		.set	noat
+		SAVE_ALL
+		CLI
+		.set	at
+
+		/*
+		 * Get pending interrupts
+		 */
+		mfc0	t0,CP0_CAUSE		# get pending interrupts
+		mfc0	t1,CP0_STATUS		# get enabled interrupts
+		and	t0,t1			# isolate allowed ones
+		andi	t0,0xff00		# isolate pending bits
+		beqz	t0,spurious_interrupt
+		sll	t0,16			# delay slot
+
+		/*
+		 * Find irq with highest priority
+		 * FIXME: This is slow - use binary search
+		 */
+		la	t1,ll_vectors
+1:		bltz	t0,2f			# found pending irq
+		sll	t0,1
+		b	1b
+		subu	t1,PTRSIZE		# delay slot
+
+		/*
+		 * Do the low-level stuff
+		 */
+2:		lw	t0,(t1)
+		jr	t0
+		nop				# delay slot
+		END(acer_pica_61_handle_int)
+
+/*
+ * Used for keyboard driver's fake_keyboard_interrupt()
+ */
+ll_sw0:		li	s1,~IE_SW0
+		mfc0	t0,CP0_CAUSE
+		and	t0,s1
+		mtc0	t0,CP0_CAUSE
+	PRINT("sw0 received...\n")
+		li	t1,1
+		b	call_real
+		li	t3,PTRSIZE	# delay slot, re-map to irq level 1
+
+ll_sw1:		li	s1,~IE_SW1
+		PANIC("Unimplemented sw1 handler")
+
+ll_local_dma:	li	s1,~IE_IRQ0
+		PANIC("Unimplemented local_dma handler")
+
+ll_local_dev:	lbu	t0,JAZZ_IO_IRQ_SOURCE
+#if __mips == 3
+		dsll	t0,1
+		ld	t0,local_vector(t0)
+#else /* 32 bit */
+		lw	t0,local_vector(t0)
+#endif
+		jr	t0
+		nop
+
+
+loc_no_irq:	PANIC("Unimplemented loc_no_irq handler")
+/*
+ * Parallel port IRQ, remapped to level 5
+ */
+loc_parallel:	li	s1,~JAZZ_IE_PARALLEL
+		li	t1,JAZZ_PARALLEL_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_PARALLEL_IRQ 	# delay slot
+
+/*
+ * Floppy IRQ, remapped to level 6
+ */
+loc_floppy:	li	s1,~JAZZ_IE_FLOPPY
+		li	t1,JAZZ_FLOPPY_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_FLOPPY_IRQ 	# delay slot
+
+/*
+ * Now call the real handler
+ */
+loc_call:	lui	s3,%hi(intr_count)
+		lw	t2,%lo(intr_count)(s3)
+		la	t0,IRQ_vectors			# delay slot
+		addiu	t2,1
+		sw	t2,%lo(intr_count)(s3)
+
+		/*
+		 * Temporarily disable interrupt source
+		 */
+		lhu	t2,JAZZ_IO_IRQ_ENABLE
+		addu	t0,t3				# make ptr to IRQ handler
+		lw	t0,(t0)
+		and	t2,s1				# delay slot
+		sh	t2,JAZZ_IO_IRQ_ENABLE
+		jalr	t0				# call IRQ handler
+ 		nor	s1,zero,s1			# delay slot
+ 
+ 		/*
+ 		 * Reenable interrupt
+ 		 */
+		lhu	t2,JAZZ_IO_IRQ_ENABLE
+ 		lw	t1,%lo(intr_count)(s3)		# delay slot
+ 		or	t2,s1
+		sh	t2,JAZZ_IO_IRQ_ENABLE
+ 
+ 		subu	t1,1
+ 		jr	v0
+		sw	t1,%lo(intr_count)(s3)		# delay slot
+
+ll_isa_irq:	li	s1,~IE_IRQ2
+		PANIC("Unimplemented isa_irq handler")
+
+ll_isa_nmi:	li	s1,~IE_IRQ3
+		PANIC("Unimplemented isa_nmi handler")
+
+/*
+ * Timer IRQ
+ * We remap the timer irq to be more similar to an IBM compatible
+ */
+ll_timer:	lw	zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
+		li	s1,~IE_IRQ4
+		li	t1,0
+		b	call_real
+		li	t3,0		# delay slot, re-map to irq level 0
+
+/*
+ * CPU count/compare IRQ (unused)
+ */
+ll_count:	j	return
+		mtc0	zero,CP0_COMPARE
+
+/*
+ * Now call the real handler
+ */
+call_real:	lui	s3,%hi(intr_count)
+		lw	t2,%lo(intr_count)(s3)
+		la	t0,IRQ_vectors
+		addiu	t2,1
+		sw	t2,%lo(intr_count)(s3)
+
+		/*
+		 * temporarily disable interrupt
+		 */
+		mfc0	t2,CP0_STATUS
+		and	t2,s1
+
+		addu	t0,t3
+		lw	t0,(t0)
+		mtc0	t2,CP0_STATUS		# delay slot
+		jalr	t0
+		nor	s1,zero,s1		# delay slot
+
+		/*
+		 * reenable interrupt
+		 */
+		mfc0	t2,CP0_STATUS
+		or	t2,s1
+		mtc0	t2,CP0_STATUS
+
+		lw	t2,%lo(intr_count)(s3)
+		subu	t2,1
+
+		jr	v0
+		sw	t2,%lo(intr_count)(s3)
+
+		.data
+		PTR	ll_sw0			# SW0
+		PTR	ll_sw1			# SW1
+		PTR	ll_local_dma		# Local DMA
+		PTR	ll_local_dev		# Local devices
+		PTR	ll_isa_irq		# ISA IRQ
+		PTR	ll_isa_nmi		# ISA NMI
+		PTR	ll_timer		# Timer
+ll_vectors:	PTR	ll_count		# Count/Compare IRQ
+
+
+/*
+ * Sound? What sound hardware (whistle) ???
+ */
+loc_sound:	PANIC("Unimplemented loc_sound handler")
+loc_video:	PANIC("Unimplemented loc_video handler")
+
+/*
+ * Ethernet interrupt handler, remapped to level 2
+ */
+loc_ethernet: 	li	s1,~JAZZ_IE_ETHERNET
+		li	t1,JAZZ_ETHERNET_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_ETHERNET_IRQ 	# delay slot
+
+loc_scsi:	PANIC("Unimplemented loc_scsi handler")
+
+/*
+ * Keyboard interrupt handler
+ */
+loc_keyboard:	li	s1,~JAZZ_IE_KEYBOARD
+		li	t1,JAZZ_KEYBOARD_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_KEYBOARD_IRQ	# re-map to irq level 1
+
+loc_mouse:	PANIC("Unimplemented loc_mouse handler")
+
+/*
+ * Serial port 1 IRQ, remapped to level 3
+ */
+loc_serial1:	li	s1,~JAZZ_IE_SERIAL1
+		li	t1,JAZZ_SERIAL1_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_SERIAL1_IRQ 	# delay slot
+
+/*
+ * Serial port 2 IRQ, remapped to level 4
+ */
+loc_serial2:	li	s1,~JAZZ_IE_SERIAL2
+		li	t1,JAZZ_SERIAL2_IRQ
+		b	loc_call
+		li	t3,PTRSIZE*JAZZ_SERIAL2_IRQ 	# delay slot
+
+		.data
+local_vector:	PTR	loc_no_irq
+		PTR	loc_parallel
+		PTR	loc_floppy
+		PTR	loc_sound
+		PTR	loc_video
+		PTR	loc_ethernet
+		PTR	loc_scsi
+		PTR	loc_keyboard
+		PTR	loc_mouse
+		PTR	loc_serial1
+		PTR	loc_serial2
+
+		.align	5
+		.text
+LEAF(spurious_interrupt)
+		/*
+		 * Nothing happened... (whistle)
+		 */
+		lui	t1,%hi(spurious_count)
+		lw	t0,%lo(spurious_count)(t1)
+		la	v0,return
+		addiu	t0,1
+		jr	ra
+		sw	t0,%lo(spurious_count)(t1)
+		END(spurious_interrupt)
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this