patch-2.1.76 linux/drivers/sound/configure.c
Next file: linux/drivers/sound/dev_table.h
Previous file: linux/drivers/sound/bin2hex.c
Back to the patch index
Back to the overall index
- Lines: 1675
- Date:
Wed Dec 31 16:00:00 1969
- Orig file:
v2.1.75/linux/drivers/sound/configure.c
- Orig date:
Sun Dec 21 22:36:15 1997
diff -u --recursive --new-file v2.1.75/linux/drivers/sound/configure.c linux/drivers/sound/configure.c
@@ -1,1674 +0,0 @@
-/*
- * PnP soundcard support is not included in this version.
- *
- * AESDP16 driver is now included in the lowlevel directory.
- */
-#define DISABLED_OPTIONS (B(OPT_SPNP)|B(OPT_AEDSP16)|B(OPT_UNUSED1)|B(OPT_UNUSED2)|B(OPT_UNUSED3)|B(OPT_UNUSED4)|B(OPT_UNUSED5)|B(OPT_UART6850))
-/*
- * sound/configure.c - Configuration program for the Linux Sound Driver
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <string.h>
-
-#define B(x) (1 << (x))
-
-/*
- * Option numbers
- */
-
-#define OPT_PAS 0
-#define OPT_SB 1
-#define OPT_ADLIB 2
-#define OPT_LAST_MUTUAL 2
-
-#define OPT_GUS 3
-#define OPT_MPU401 4
-#define OPT_UART6850 5
-#define OPT_PSS 6
-#define OPT_GUS16 7
-#define OPT_GUSMAX 8
-#define OPT_MSS 9
-#define OPT_SSCAPE 10
-#define OPT_TRIX 11
-#define OPT_MAD16 12
-#define OPT_CS4232 13
-#define OPT_MAUI 14
-#define OPT_SPNP 15
-#define OPT_OPL3SA1 16
-#define OPT_SOFTOSS 17
-
-#define OPT_HIGHLEVEL 18 /* This must be same than the next one */
-#define OPT_UNUSED1 18
-#define OPT_UNUSED2 19
-#define OPT_AEDSP16 20
-#define OPT_UNUSED3 21
-#define OPT_UNUSED4 22
-#define OPT_UNUSED5 23
-#define OPT_YM3812_AUTO 24
-#define OPT_YM3812 25
-#define OPT_VMIDI 26
-#define OPT_LAST 27 /* Last defined OPT number */
-
-#define DUMMY_OPTS (B(OPT_YM3812_AUTO))
-
-#define ANY_DEVS (B(OPT_SB)|B(OPT_PAS)|B(OPT_GUS)| \
- B(OPT_MPU401)|B(OPT_PSS)|B(OPT_GUS16)|B(OPT_GUSMAX)| \
- B(OPT_MSS)|B(OPT_SSCAPE)|B(OPT_UART6850)|B(OPT_TRIX)| \
- B(OPT_MAD16)|B(OPT_CS4232)|B(OPT_MAUI)|B(OPT_ADLIB)| \
- B(OPT_SPNP)|B(OPT_OPL3SA1)|B(OPT_SOFTOSS)|B(OPT_VMIDI))
-#define MPU_DEVS (B(OPT_PSS)|\
- B(OPT_CS4232)|B(OPT_SPNP)|B(OPT_MAUI)|B(OPT_SSCAPE))
-#define UART401_DEVS (SBDSP_DEVS|B(OPT_TRIX)|B(OPT_MAD16)|B(OPT_SPNP)|\
- B(OPT_OPL3SA1))
-#define NON_AUDIO_CARDS (B(OPT_ADLIB)|B(OPT_MPU401)|B(OPT_UART6850)|B(OPT_MAUI)|B(OPT_VMIDI))
-#define AUDIO_CARDS (ANY_DEVS & ~NON_AUDIO_CARDS)
-#define MIDI_CARDS (ANY_DEVS & ~(B(OPT_ADLIB)|B(OPT_MSS)))
-#define AD1848_DEVS (B(OPT_GUS16)|B(OPT_MSS)|B(OPT_PSS)|B(OPT_GUSMAX)|\
- B(OPT_SSCAPE)|B(OPT_TRIX)|B(OPT_MAD16)|B(OPT_CS4232)|\
- B(OPT_SPNP)|B(OPT_OPL3SA1))
-#define SBDSP_DEVS (B(OPT_SB)|B(OPT_SPNP)|B(OPT_MAD16)|B(OPT_TRIX))
-#define SEQUENCER_DEVS 0x7fffffff
-/*
- * Options that have been disabled for some reason (incompletely implemented
- * and/or tested). Don't remove from this list before looking at file
- * experimental.txt for further info.
- */
-
-typedef struct
- {
- unsigned long conditions;
- unsigned long exclusive_options;
- char macro[20];
- int verify;
- int alias;
- int default_answ;
- }
-
-hw_entry;
-
-
-/*
- * The rule table for the driver options. The first field defines a set of
- * options which must be selected before this entry can be selected. The
- * second field is a set of options which are not allowed with this one. If
- * the fourth field is zero, the option is selected without asking
- * confirmation from the user.
- *
- * With this version of the rule table it is possible to select just one type of
- * hardware.
- *
- * NOTE! Keep the following table and the questions array in sync with the
- * option numbering!
- */
-
-hw_entry hw_table[] =
-{
-/*
- * 0
- */
- {0, 0, "PAS", 1, 0, 0},
- {0, 0, "SB", 1, 0, 0},
- {0, B(OPT_PAS) | B(OPT_SB), "ADLIB", 1, 0, 0},
-
- {0, 0, "GUS", 1, 0, 0},
- {0, 0, "MPU401", 1, 0, 0},
- {0, 0, "UART6850", 1, 0, 0},
- {0, 0, "PSS", 1, 0, 0},
- {B(OPT_GUS), 0, "GUS16", 1, 0, 0},
- {B(OPT_GUS), B(OPT_GUS16), "GUSMAX", 1, 0, 0},
- {0, 0, "MSS", 1, 0, 0},
- {0, 0, "SSCAPE", 1, 0, 0},
- {0, 0, "TRIX", 1, 0, 0},
- {0, 0, "MAD16", 1, 0, 0},
- {0, 0, "CS4232", 1, 0, 0},
- {0, 0, "MAUI", 1, 0, 0},
- {0, 0, "SPNP", 1, 0, 0},
- {0, 0, "OPL3SA1", 1, 0, 0},
- {0, 0, "SOFTOSS", 1, 0, 0},
-
- {B(OPT_SB), B(OPT_PAS), "UNUSED1", 1, 0, 1},
- {B(OPT_SB) | B(OPT_UNUSED1), B(OPT_PAS), "UNUSED2", 1, 0, 1},
- {B(OPT_UNUSED1) | B(OPT_MSS) | B(OPT_MPU401), 0, "AEDSP16", 1, 0, 0},
- {AUDIO_CARDS, 0, "UNUSED3", 1, 0, 1},
- {B(OPT_MPU401) | B(OPT_MAUI), 0, "UNUSED4", 0, 0, 0},
- {MIDI_CARDS, 0, "UNUSED5", 1, 0, 1},
- {B(OPT_ADLIB), 0, "YM3812_AUTO", 0, OPT_YM3812, 0},
- {B(OPT_PSS) | B(OPT_SB) | B(OPT_PAS) | B(OPT_ADLIB) | B(OPT_MSS) | B(OPT_PSS), B(OPT_YM3812_AUTO), "YM3812", 1, 0, 1},
- {0, 0, "VMIDI", 1, 0, 0}
-};
-
-char *questions[] =
-{
- "ProAudioSpectrum 16 support",
- "100%% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support",
- "Generic OPL2/OPL3 FM synthesizer support",
- "Gravis Ultrasound support",
- "MPU-401 support (NOT for SB16)",
- "6850 UART Midi support",
- "PSS (ECHO-ADI2111) support",
- "16 bit sampling option of GUS (_NOT_ GUS MAX)",
- "GUS MAX support",
- "Microsoft Sound System support",
- "Ensoniq SoundScape support",
- "MediaTrix AudioTrix Pro support",
- "Support for OPTi MAD16 and/or Mozart based cards",
- "Support for Crystal CS4232 based (PnP) cards",
- "Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers",
- "Support for PnP sound cards (_EXPERIMENTAL_)",
- "Yamaha OPL3-SA1 audio controller",
- "SoftOSS software wave table engine",
-
- "*** Unused option 1 ***",
- "*** Unused option 2 ***",
- "Audio Excel DSP 16 initialization support",
- "*** Unused option 3 ***",
- "*** Unused option 4 ***",
- "*** Unused option 5 ***",
- "This should not be asked",
- "FM synthesizer (YM3812/OPL-3) support",
- "Loopback MIDI device support",
- "Is the sky really falling"
-};
-
-/* help text for each option */
-char *help[] =
-{
- "Enable this option only if you have a Pro Audio Spectrum 16,\n"
- "Pro Audio Studio 16, or Logitech SoundMan 16. Don't enable this if\n"
- "you have some other card made by MediaVision or Logitech as\n"
- "they are not PAS16 compatible.\n",
-
- "Enable this if you have an original Sound Blaster card made by\n"
- "Creative Labs or a 100%% hardware compatible clone. For an\n"
- "unknown card you may want to try this if it claims to be\n"
- "Sound Blaster compatible.\n",
-
- "Enable this option if your sound card has a Yamaha OPL2 or OPL3\n"
- "FM synthesizer chip.\n",
-
- "Enable this option for any type of Gravis Ultrasound card\n"
- "including the GUS or GUS MAX.\n",
-
-"The MPU401 interface is supported by almost all sound cards. However,\n"
- "some natively supported cards have their own driver for\n"
- "MPU401. Enabling the MPU401 option with these cards will cause a\n"
-"conflict. Also enabling MPU401 on a system that doesn't really have a\n"
- "MPU401 could cause some trouble. It's safe to enable this if you have a\n"
- "true MPU401 MIDI interface card.\n",
-
- "This option enables support for MIDI interfaces based on the 6850\n"
- "UART chip. This interface is rarely found on sound cards.\n",
-
-"Enable this option if you have an Orchid SW32, Cardinal DSP16 or other\n"
-"sound card based on the PSS chipset (AD1848 codec, ADSP-2115 DSP chip,\n"
- "and Echo ESC614 ASIC CHIP).\n",
-
-"Enable this if you have installed the 16-bit sampling daughtercard on\n"
- "your GUS card. Do not use if you have a GUS MAX as enabling this option\n"
- "disables GUS MAX support.\n",
-
- "Enable this option if you have a Gravis Ultrasound MAX sound\n"
- "card\n",
-
- "Enable this option if you have the original Windows Sound System\n"
- "card made by Microsoft or the Aztech SG 16 Pro or NX16 Pro.\n",
-
- "Enable this if you have a sound card based on the Ensoniq\n"
- "SoundScape chipset. Such cards are being manufactured by Ensoniq,\n"
- "Spea and Reveal (Reveal makes other cards as well).\n",
-
- "Enable this option if you have the AudioTrix Pro sound card\n"
- "manufactured by MediaTrix.\n",
-
- "Enable this if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi\n"
- "82C928 or 82C929) audio interface chip. These chips are currently\n"
- "quite common so it's possible that many no-name cards have one of\n"
- "them. In addition the MAD16 chip is used in some cards made by known\n"
-"manufacturers such as Turtle Beach (Tropez), Reveal (some models) and\n"
- "Diamond (latest ones).\n",
-
-"Enable this if you have a card based on the Crystal CS4232 chip set.\n",
-
- "Enable this option if you have a Turtle Beach Wave Front, Maui,\n"
- "or Tropez sound card.\n",
-
- "Use this option to enable experimental support for cards that\n"
- "use the Plug and Play protocol.\n",
-
- "Use this option with Yamaha OPL3-SA1 (YMF701) chip.\n",
-
-"SoftOSS is a virtual wave table engine by 4Front Technologies. It can\n"
- "be used together with any 16 bit stereo soundcard.\n"
-
- "Enable this option if your card is a Sound Blaster Pro or\n"
- "Sound Blaster 16. It also works with many Sound Blaster Pro clones.\n",
-
- "Enable this if you have a Sound Blaster 16, including the AWE32.\n",
-
- "Enable this if you have an Audio Excel DSP16 card. See the file\n"
- "Readme.aedsp16 for more information.\n",
-
- "This option enables the A/D and D/A converter (PCM) devices\n"
- "supported by almost all sound cards.\n",
-
- "This should not be asked",
-
- "This enables the dev/midixx devices and access to any MIDI ports\n"
- "using /dev/sequencer and /dev/music. This option also affects any\n"
- "MPU401 and/or General MIDI compatible devices.\n",
-
- "This should not be asked",
-
- "This enables the Yamaha FM synthesizer chip used on many sound\n"
- "cards.\n",
-
- "This enable Loopback virtual MIDI device\n",
-
- "Is the sky really falling"
-};
-
-struct kludge
- {
- char *name;
- int mask;
- }
-extra_options[] =
-{
- {
- "MPU_EMU", MPU_DEVS
- }
- ,
- {
- "AD1848", AD1848_DEVS
- }
- ,
- {
- "SBDSP", SBDSP_DEVS
- }
- ,
- {
- "UART401", UART401_DEVS
- }
- ,
- {
- "GUSHW", B(OPT_GUS) | B(OPT_SPNP)
- }
- ,
- {
- "SSCAPEHW", B(OPT_SSCAPE) | B(OPT_SPNP)
- }
- ,
- {
- "SEQUENCER", SEQUENCER_DEVS
- }
- ,
- {
- "AUDIO", AUDIO_CARDS
- }
- ,
- {
- "MIDI", MIDI_CARDS
- }
- ,
- {
- NULL, 0
- }
-};
-
-char *oldconf = "/etc/soundconf";
-
-int old_config_used = 0;
-int def_size, sb_base = 0;
-
-unsigned long selected_options = 0;
-int sb_dma = 0;
-
-int dump_only = 0;
-
-void build_defines(void);
-
-#include "hex2hex.h"
-int bin2hex(char *path, char *target, char *varname);
-
-int
-can_select_option(int nr)
-{
-
- if (hw_table[nr].conditions)
- if (!(hw_table[nr].conditions & selected_options))
- return 0;
-
- if (hw_table[nr].exclusive_options)
- if (hw_table[nr].exclusive_options & selected_options)
- return 0;
-
- if (DISABLED_OPTIONS & B(nr))
- return 0;
-
- return 1;
-}
-
-int
-think_positively(char *prompt, int def_answ, char *help)
-{
- char answ[512];
- int len;
-
- response:
- fprintf(stderr, prompt);
- if (def_answ)
- fprintf(stderr, " [Y/n/?] ");
- else
- fprintf(stderr, " [N/y/?] ");
-
- if ((len = read(0, answ, sizeof(answ))) < 1)
- {
- fprintf(stderr, "\n\nERROR! Cannot read stdin\n");
-
- perror("stdin");
- printf("invalid_configuration__run_make_config_again\n");
- exit(-1);
- }
- if (len < 2) /*
- * There is an additional LF at the end
- */
- return def_answ;
-
- if (answ[0] == '?')
- { /* display help message */
- fprintf(stderr, "\n");
- fprintf(stderr, help);
- fprintf(stderr, "\n");
- goto response;
- }
- answ[len - 1] = 0;
-
- if (!strcmp(answ, "y") || !strcmp(answ, "Y"))
- return 1;
-
- return 0;
-}
-
-int
-ask_value(char *format, int default_answer)
-{
- char answ[512];
- int len, num;
-
- play_it_again_Sam:
-
- if ((len = read(0, answ, sizeof(answ))) < 1)
- {
- fprintf(stderr, "\n\nERROR! Cannot read stdin\n");
-
- perror("stdin");
- printf("invalid_configuration__run_make_config_again\n");
- exit(-1);
- }
- if (len < 2) /*
- * There is an additional LF at the end
- */
- return default_answer;
-
- answ[len - 1] = 0;
-
- if (sscanf(answ, format, &num) != 1)
- {
- fprintf(stderr, "Illegal format. Try again: ");
- goto play_it_again_Sam;
- }
- return num;
-}
-
-#define FMT_HEX 1
-#define FMT_INT 2
-
-void
-show_comment(int mask, char *txt)
-{
- int i;
-
- if (dump_only)
- {
-
- for (i = 0; i < OPT_LAST; i++)
- if (mask == B(i))
- {
- printf("\n\nif [ \"$CONFIG_%s\" = \"y\" ]; then\n",
- hw_table[i].macro);
- printf("comment '%s'\n", txt);
- printf("fi\n");
- }
- } else
- {
- if (!(mask & selected_options))
- return;
-
- fprintf(stderr, "%s\n", txt);
- }
-}
-
-void
-ask_int_choice(int mask, char *macro,
- char *question,
- int format,
- int defa,
- char *choices)
-{
- int num, i;
-
- if (dump_only)
- {
-
- for (i = 0; i < OPT_LAST; i++)
- if (mask == B(i))
- {
- unsigned int j;
-
- for (j = 0; j < strlen(choices); j++)
- if (choices[j] == '\'')
- choices[j] = '_';
-
- printf("\nif [ \"$CONFIG_%s\" = \"y\" ]; then\n",
- hw_table[i].macro);
- if (format == FMT_INT)
- printf("int '%s %s' %s %d\n", question, choices, macro, defa);
- else
- printf("hex '%s %s' %s %x\n", question, choices, macro, defa);
- printf("fi\n");
- }
- } else
- {
- if (!(mask & selected_options))
- return;
-
- fprintf(stderr, "\n%s\n", question);
- if (strcmp(choices, ""))
- fprintf(stderr, "Possible values are: %s\n", choices);
-
- if (format == FMT_INT)
- {
- if (defa == -1)
- fprintf(stderr, "\t(-1 disables this feature)\n");
- fprintf(stderr, "The default value is %d\n", defa);
- fprintf(stderr, "Enter the value: ");
- num = ask_value("%d", defa);
- if (num == -1)
- return;
- fprintf(stderr, "%s set to %d.\n", question, num);
- printf("#define %s %d\n", macro, num);
- } else
- {
- if (defa == 0)
- fprintf(stderr, "\t(0 disables this feature)\n");
- fprintf(stderr, "The default value is %x\n", defa);
- fprintf(stderr, "Enter the value: ");
- num = ask_value("%x", defa);
- if (num == 0)
- return;
- fprintf(stderr, "%s set to %x.\n", question, num);
- printf("#define %s 0x%x\n", macro, num);
- }
- }
-}
-
-void
-rebuild_file(char *line)
-{
- char *method, *next, *old, *var, *p;
-
- method = p = line;
-
- while (*p && *p != ' ')
- p++;
- *p++ = 0;
-
- old = p;
- while (*p && *p != ' ')
- p++;
- *p++ = 0;
-
- next = p;
- while (*p && *p != ' ')
- p++;
- *p++ = 0;
-
- var = p;
- while (*p && *p != ' ')
- p++;
- *p++ = 0;
-
- fprintf(stderr, "Rebuilding file `%s' (%s %s)\n", next, method, old);
-
- if (strcmp(method, "bin2hex") == 0)
- {
- if (!bin2hex(old, next, var))
- {
- fprintf(stderr, "Rebuild failed\n");
- exit(-1);
- }
- } else if (strcmp(method, "hex2hex") == 0)
- {
- if (!hex2hex(old, next, var))
- {
- fprintf(stderr, "Rebuild failed\n");
- exit(-1);
- }
- } else
- {
- fprintf(stderr, "Failed to build `%s' - unknown method %s\n",
- next, method);
- exit(-1);
- }
-}
-
-int
-use_old_config(char *filename)
-{
- char buf[1024];
- int i = 0;
-
- FILE *oldf;
-
- fprintf(stderr, "Copying old configuration from `%s'\n", filename);
-
- if ((oldf = fopen(filename, "r")) == NULL)
- {
- fprintf(stderr, "Couldn't open previous configuration file\n");
- perror(filename);
- return 0;
- }
- while (fgets(buf, 1024, oldf) != NULL)
- {
- char tmp[100];
-
- if (buf[0] != '#')
- {
- printf("%s", buf);
-
- strncpy(tmp, buf, 8);
- tmp[8] = 0;
-
- if (strcmp(tmp, "/*build ") == 0)
- rebuild_file(&buf[8]);
-
- continue;
- }
- strncpy(tmp, buf, 8);
- tmp[8] = 0;
-
- if (strcmp(tmp, "#define ") == 0)
- {
- char *id = &buf[8];
-
- i = 0;
- while (id[i] && id[i] != ' ' &&
- id[i] != '\t' && id[i] != '\n')
- i++;
-
- strncpy(tmp, id, i);
- tmp[i] = 0;
-
- if (strcmp(tmp, "SELECTED_SOUND_OPTIONS") == 0)
- continue;
-
- if (strcmp(tmp, "KERNEL_SOUNDCARD") == 0)
- continue;
-
- if (strcmp(tmp, "JAZZ_DMA16") == 0) /* Rename it (hack) */
- {
- printf("#define SB_DMA2 %s\n",
- &buf[18]);
- continue;
- }
- if (strcmp(tmp, "SB16_DMA") == 0) /* Rename it (hack) */
- {
- printf("#define SB_DMA2 %s\n",
- &buf[16]);
- continue;
- }
- tmp[8] = 0; /* Truncate the string */
- if (strcmp(tmp, "EXCLUDE_") == 0)
- continue; /* Skip excludes */
-
- strncpy(tmp, id, i);
- tmp[7] = 0; /* Truncate the string */
-
- if (strcmp(tmp, "CONFIG_") == 0)
- {
- strncpy(tmp, &id[7], i - 7);
- tmp[i - 7] = 0;
-
- for (i = 0; i <= OPT_LAST; i++)
- if (strcmp(hw_table[i].macro, tmp) == 0)
- {
- selected_options |= (1 << i);
- break;
- }
- continue;
- }
- printf("%s", buf);
- continue;
- }
- if (strcmp(tmp, "#undef ") == 0)
- {
- char *id = &buf[8];
-
- i = 0;
- while (id[i] && id[i] != ' ' &&
- id[i] != '\t' && id[i] != '\n')
- i++;
-
- strncpy(tmp, id, i);
- tmp[7] = 0; /* Truncate the string */
- if (strcmp(tmp, "CONFIG_") == 0)
- continue;
-
- strncpy(tmp, id, i);
-
- tmp[8] = 0; /* Truncate the string */
- if (strcmp(tmp, "EXCLUDE_") != 0)
- continue; /* Not a #undef EXCLUDE_ line */
- strncpy(tmp, &id[8], i - 8);
- tmp[i - 8] = 0;
-
- for (i = 0; i <= OPT_LAST; i++)
- if (strcmp(hw_table[i].macro, tmp) == 0)
- {
- selected_options |= (1 << i);
- break;
- }
- continue;
- }
- printf("%s", buf);
- }
- fclose(oldf);
-
- for (i = 0; i <= OPT_LAST; i++)
- if (!hw_table[i].alias)
- if (selected_options & B(i))
- printf("#define CONFIG_%s\n", hw_table[i].macro);
- else
- printf("#undef CONFIG_%s\n", hw_table[i].macro);
-
-
- printf("\n");
-
- i = 0;
-
- while (extra_options[i].name != NULL)
- {
- if (selected_options & extra_options[i].mask)
- printf("#define CONFIG_%s\n", extra_options[i].name);
- else
- printf("#undef CONFIG_%s\n", extra_options[i].name);
- i++;
- }
-
- printf("\n");
-
- printf("#define SELECTED_SOUND_OPTIONS\t0x%08x\n", selected_options);
- fprintf(stderr, "Old configuration copied.\n");
-
- build_defines();
- old_config_used = 1;
- return 1;
-}
-
-void
-build_defines(void)
-{
- FILE *optf;
- int i;
-
- if ((optf = fopen(".defines", "w")) == NULL)
- {
- perror(".defines");
- exit(-1);
- }
- for (i = 0; i <= OPT_LAST; i++)
- if (!hw_table[i].alias)
- if (selected_options & B(i))
- fprintf(optf, "CONFIG_%s=y\n", hw_table[i].macro);
-
-
- fprintf(optf, "\n");
-
- i = 0;
-
- while (extra_options[i].name != NULL)
- {
- if (selected_options & extra_options[i].mask)
- fprintf(optf, "CONFIG_%s=y\n", extra_options[i].name);
- i++;
- }
-
- fprintf(optf, "\n");
- fclose(optf);
-}
-
-void
-ask_parameters(void)
-{
- int num;
-
- build_defines();
- /*
- * IRQ and DMA settings
- */
-
- ask_int_choice(B(OPT_AEDSP16), "AEDSP16_BASE",
- "I/O base for Audio Excel DSP 16",
- FMT_HEX,
- 0x220,
- "220 or 240");
-
- ask_int_choice(B(OPT_SB), "SBC_BASE",
- "I/O base for SB",
- FMT_HEX,
- 0x220,
- "Check from manual of the card");
-
- ask_int_choice(B(OPT_SB), "SBC_IRQ",
- "Sound Blaster IRQ",
- FMT_INT,
- 7,
- "Check from manual of the card");
-
- ask_int_choice(B(OPT_SB), "SBC_DMA",
- "Sound Blaster DMA",
- FMT_INT,
- 1,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_SB), "SB_DMA2",
- "Sound Blaster 16 bit DMA (SB16, Jazz16, SMW)",
- FMT_INT,
- 5,
- "5, 6 or 7 (use 1 for 8 bit cards)");
-
- ask_int_choice(B(OPT_SB), "SB_MPU_BASE",
- "MPU401 I/O base of SB16, Jazz16 and ES1688",
- FMT_HEX,
- 0x330,
- "Check from manual of the card");
-
- show_comment(B(OPT_SB),
- "MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.");
- show_comment(B(OPT_SB),
- "Enter -1 to the following question if you have something else such as SB16/32.");
-
- ask_int_choice(B(OPT_SB), "SB_MPU_IRQ",
- "SB MPU401 IRQ (Jazz16, SM Wave and ES1688)",
- FMT_INT,
- -1,
- "Check from manual of the card");
-
- ask_int_choice(B(OPT_PAS), "PAS_IRQ",
- "PAS16 IRQ",
- FMT_INT,
- 10,
- "3, 4, 5, 7, 9, 10, 11, 12, 14 or 15");
-
- ask_int_choice(B(OPT_PAS), "PAS_DMA",
- "PAS16 DMA",
- FMT_INT,
- 3,
- "0, 1, 3, 5, 6 or 7");
-
- if (selected_options & B(OPT_PAS))
- {
- if (think_positively("Enable Joystick port on ProAudioSpectrum", 0,
- "Enable this option if you want to use the joystick port provided\n"
- "on the PAS sound card.\n"))
- printf("#define PAS_JOYSTICK_ENABLE\n");
-
- if (think_positively("Enable PAS16 bus clock option", 0,
- "The PAS16 can be noisy with some motherboards. There is a command\n"
- "line switch (:T?) in the DOS driver for PAS16 which solves this.\n"
- "Don't enable this feature unless you have problems and have to use\n"
- "this switch with DOS\n"))
- printf("#define BROKEN_BUS_CLOCK\n");
-
- if (think_positively("Disable SB mode of PAS16", 0,
- "You should disable SB emulation of PAS16 if you want to use\n"
- "Another SB compatible card in the same system\n"))
- printf("#define DISABLE_SB_EMULATION\n");
- }
- ask_int_choice(B(OPT_GUS), "GUS_BASE",
- "I/O base for GUS",
- FMT_HEX,
- 0x220,
- "210, 220, 230, 240, 250 or 260");
-
-
- ask_int_choice(B(OPT_GUS), "GUS_IRQ",
- "GUS IRQ",
- FMT_INT,
- 15,
- "3, 5, 7, 9, 11, 12 or 15");
-
- ask_int_choice(B(OPT_GUS), "GUS_DMA",
- "GUS DMA",
- FMT_INT,
- 6,
- "1, 3, 5, 6 or 7");
-
- ask_int_choice(B(OPT_GUS), "GUS_DMA2",
- "Second DMA channel for GUS",
- FMT_INT,
- -1,
- "1, 3, 5, 6 or 7");
-
- ask_int_choice(B(OPT_GUS16), "GUS16_BASE",
- "I/O base for the 16 bit daughtercard of GUS",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
-
- ask_int_choice(B(OPT_GUS16), "GUS16_IRQ",
- "GUS 16 bit daughtercard IRQ",
- FMT_INT,
- 7,
- "3, 4, 5, 7, or 9");
-
- ask_int_choice(B(OPT_GUS16), "GUS16_DMA",
- "GUS DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_MPU401), "MPU_BASE",
- "I/O base for MPU401",
- FMT_HEX,
- 0x330,
- "Check from manual of the card");
-
- ask_int_choice(B(OPT_MPU401), "MPU_IRQ",
- "MPU401 IRQ",
- FMT_INT,
- 9,
- "Check from manual of the card");
-
- if (dump_only)
- show_comment(B(OPT_MAUI),
- "ERROR! You have to use old sound configuration method with Maui.");
-
- ask_int_choice(B(OPT_MAUI), "MAUI_BASE",
- "I/O base for Maui",
- FMT_HEX,
- 0x330,
- "210, 230, 260, 290, 300, 320, 338 or 330");
-
- ask_int_choice(B(OPT_MAUI), "MAUI_IRQ",
- "Maui IRQ",
- FMT_INT,
- 9,
- "5, 9, 12 or 15");
-
- ask_int_choice(B(OPT_UART6850), "U6850_BASE",
- "I/O base for UART 6850 MIDI port",
- FMT_HEX,
- 0,
- "(Unknown)");
-
- ask_int_choice(B(OPT_UART6850), "U6850_IRQ",
- "UART6850 IRQ",
- FMT_INT,
- -1,
- "(Unknown)");
-
- if (dump_only)
- show_comment(B(OPT_PSS),
- "ERROR! You have to use old sound configuration method with PSS cards.");
-
- ask_int_choice(B(OPT_PSS), "PSS_BASE",
- "PSS I/O base",
- FMT_HEX,
- 0x220,
- "220 or 240");
-
- ask_int_choice(B(OPT_PSS), "PSS_MSS_BASE",
- "PSS audio I/O base",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
- ask_int_choice(B(OPT_PSS), "PSS_MSS_IRQ",
- "PSS audio IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
- ask_int_choice(B(OPT_PSS), "PSS_MSS_DMA",
- "PSS audio DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_PSS), "PSS_MPU_BASE",
- "PSS MIDI I/O base",
- FMT_HEX,
- 0x330,
- "");
-
- ask_int_choice(B(OPT_PSS), "PSS_MPU_IRQ",
- "PSS MIDI IRQ",
- FMT_INT,
- 9,
- "3, 4, 5, 7 or 9");
-
- ask_int_choice(B(OPT_MSS), "MSS_BASE",
- "MSS/WSS I/O base",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
- ask_int_choice(B(OPT_MSS), "MSS_IRQ",
- "MSS/WSS IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
- ask_int_choice(B(OPT_MSS), "MSS_DMA",
- "MSS/WSS DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_MSS), "MSS_DMA2",
- "MSS/WSS second DMA (if possible)",
- FMT_INT,
- -1,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_SSCAPE), "SSCAPE_BASE",
- "SoundScape MIDI I/O base",
- FMT_HEX,
- 0x330,
- "320, 330, 340 or 350");
-
- ask_int_choice(B(OPT_SSCAPE), "SSCAPE_IRQ",
- "SoundScape MIDI IRQ",
- FMT_INT,
- 9,
- "");
-
- ask_int_choice(B(OPT_SSCAPE), "SSCAPE_DMA",
- "SoundScape initialization DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_SSCAPE), "SSCAPE_MSS_BASE",
- "SoundScape audio I/O base",
- FMT_HEX,
- 0x534,
- "534, 608, E84 or F44");
-
- ask_int_choice(B(OPT_SSCAPE), "SSCAPE_MSS_IRQ",
- "SoundScape audio IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
-
- if (selected_options & B(OPT_SSCAPE))
- {
- int reveal_spea;
-
- reveal_spea = think_positively(
- "Is your SoundScape card made/marketed by Reveal or Spea",
- 0,
- "Enable if you have a SoundScape card with the Reveal or\n"
- "Spea name on it.\n");
- if (reveal_spea)
- printf("#define REVEAL_SPEA\n");
-
- }
- if (dump_only)
- show_comment(B(OPT_TRIX),
- "ERROR! You have to use old sound configuration method with OPL3-SA1.");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_BASE",
- "OPL3-SA1 audio I/O base",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_IRQ",
- "OPL3-SA1 audio IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_DMA",
- "OPL3-SA1 audio DMA",
- FMT_INT,
- 0,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_DMA2",
- "OPL3-SA1 second (duplex) DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_MPU_BASE",
- "OPL3-SA1 MIDI I/O base",
- FMT_HEX,
- 0x330,
- "330, 370, 3B0 or 3F0");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_MPU_IRQ",
- "OPL3-SA1 MIDI IRQ",
- FMT_INT,
- 9,
- "3, 4, 5, 7 or 9");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_SB_BASE",
- "OPL3-SA1 SB I/O base",
- FMT_HEX,
- 0x220,
- "220, 210, 230, 240, 250, 260 or 270");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_SB_IRQ",
- "OPL3-SA1 SB IRQ",
- FMT_INT,
- 7,
- "3, 4, 5 or 7");
-
- ask_int_choice(B(OPT_TRIX), "TRIX_SB_DMA",
- "OPL3-SA1 SB DMA",
- FMT_INT,
- 1,
- "1 or 3");
-
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_BASE",
- "OPL3-SA1 audio I/O base",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_IRQ",
- "OPL3-SA1 audio IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_DMA",
- "OPL3-SA1 audio DMA",
- FMT_INT,
- 0,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_DMA2",
- "OPL3-SA1 second (duplex) DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_MPU_BASE",
- "OPL3-SA1 MIDI I/O base",
- FMT_HEX,
- 0x330,
- "330, 370, 3B0 or 3F0");
-
- ask_int_choice(B(OPT_OPL3SA1), "OPL3SA1_MPU_IRQ",
- "OPL3-SA1 MIDI IRQ",
- FMT_INT,
- 9,
- "3, 4, 5, 7 or 9");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_BASE",
- "CS4232 audio I/O base",
- FMT_HEX,
- 0x534,
- "534, 608, E84 or F44");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_IRQ",
- "CS4232 audio IRQ",
- FMT_INT,
- 11,
- "5, 7, 9, 11, 12 or 15");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_DMA",
- "CS4232 audio DMA",
- FMT_INT,
- 0,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_DMA2",
- "CS4232 second (duplex) DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_MPU_BASE",
- "CS4232 MIDI I/O base",
- FMT_HEX,
- 0x330,
- "330, 370, 3B0 or 3F0");
-
- ask_int_choice(B(OPT_CS4232), "CS4232_MPU_IRQ",
- "CS4232 MIDI IRQ",
- FMT_INT,
- 9,
- "5, 7, 9, 11, 12 or 15");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_BASE",
- "MAD16 audio I/O base",
- FMT_HEX,
- 0x530,
- "530, 604, E80 or F40");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_IRQ",
- "MAD16 audio IRQ",
- FMT_INT,
- 11,
- "7, 9, 10 or 11");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_DMA",
- "MAD16 audio DMA",
- FMT_INT,
- 3,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_DMA2",
- "MAD16 second (duplex) DMA",
- FMT_INT,
- 0,
- "0, 1 or 3");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_MPU_BASE",
- "MAD16 MIDI I/O base",
- FMT_HEX,
- 0x330,
- "300, 310, 320 or 330 (0 disables)");
-
- ask_int_choice(B(OPT_MAD16), "MAD16_MPU_IRQ",
- "MAD16 MIDI IRQ",
- FMT_INT,
- 9,
- "5, 7, 9 or 10");
- ask_int_choice(B(OPT_SOFTOSS), "SOFTOSS_RATE",
- "Sampling rate for SoftOSS",
- FMT_INT,
- 22050,
- "8000 to 48000");
- ask_int_choice(B(OPT_SOFTOSS), "SOFTOSS_VOICES",
- "Max # of concurrent voices for SoftOSS",
- FMT_INT,
- 32,
- "4 to 32");
-}
-
-void
-dump_script(void)
-{
- int i;
-
- for (i = 0; i <= OPT_LAST; i++)
- if (!(DUMMY_OPTS & B(i)))
- if (!(DISABLED_OPTIONS & B(i)))
- {
- printf("bool '%s' CONFIG_%s\n", questions[i], hw_table[i].macro);
- }
-/*
- * Some "hardcoded" options
- */
-
- dump_only = 1;
- selected_options = 0;
- ask_parameters();
-
- printf("#\n$MAKE -C drivers/sound kernelconfig || exit 1\n");
-}
-
-void
-dump_fixed_local(void)
-{
- int i = 0;
-
- printf("/* Computer generated file. Please don't edit! */\n\n");
- printf("#define KERNEL_COMPATIBLE_CONFIG\n\n");
- printf("#define SELECTED_SOUND_OPTIONS\t0x%08x\n\n", selected_options);
-
- while (extra_options[i].name != NULL)
- {
- int n = 0, j;
-
- printf("#if ");
-
- for (j = 0; j < OPT_LAST; j++)
- if (!(DISABLED_OPTIONS & B(j)))
- if (extra_options[i].mask & B(j))
- {
- if (n)
- printf(" || ");
- if (!(n++ % 2))
- printf("\\\n ");
-
- printf("defined(CONFIG_%s)", hw_table[j].macro);
- }
- printf("\n");
- printf("#\tdefine CONFIG_%s\n", extra_options[i].name);
- printf("#endif\n\n");
- i++;
- }
-}
-
-void
-dump_fixed_defines(void)
-{
- int i = 0;
-
- printf("# Computer generated file. Please don't edit\n\n");
-
- while (extra_options[i].name != NULL)
- {
- int j;
-
- for (j = 0; j < OPT_LAST; j++)
- {
- if (!(DISABLED_OPTIONS & B(j)))
- {
- if (extra_options[i].mask & B(j))
- {
- printf("ifdef CONFIG_%s\n", hw_table[j].macro);
- printf ("ifneq ($(CONFIG_%s),Y)\n", extra_options[i].name);
- printf("CONFIG_%s=y\n", extra_options[i].name);
- printf("endif\n");
- printf("endif\n\n");
- }
- }
- }
- i++;
- }
-}
-
-int
-main(int argc, char *argv[])
-{
- int i, full_driver = 1;
- char old_config_file[200];
-
- if (getuid() != 0) /* Not root */
- {
- char *home;
-
- if ((home = getenv("HOME")) != NULL)
- {
- sprintf(old_config_file, "%s/.soundconf", home);
- oldconf = old_config_file;
- }
- }
- if (argc > 1)
- {
- if (strcmp(argv[1], "-o") == 0 &&
- use_old_config(oldconf))
- exit(0);
- else if (strcmp(argv[1], "script") == 0)
- {
- dump_script();
- exit(0);
- } else if (strcmp(argv[1], "fixedlocal") == 0)
- {
- dump_fixed_local();
- exit(0);
- } else if (strcmp(argv[1], "fixeddefines") == 0)
- {
- dump_fixed_defines();
- exit(0);
- }
- }
- fprintf(stderr, "\nConfiguring Sound Support\n\n");
-
- if (access(oldconf, R_OK) == 0)
- {
- char str[255];
-
- sprintf(str, "Old configuration exists in `%s'. Use it", oldconf);
- if (think_positively(str, 1,
- "Enable this option to load the previously saved configuration file\n"
- "for all of the sound driver parameters.\n"))
- if (use_old_config(oldconf))
- exit(0);
- }
- printf("/*\tGenerated by configure. Don't edit!!!!\t*/\n");
- printf("/*\tMaking changes to this file is not as simple as it may look.\t*/\n\n");
- printf("/*\tIf you change the CONFIG_ settings in local.h you\t*/\n");
- printf("/*\t_have_ to edit .defines too.\t*/\n\n");
-
- {
- /*
- * Partial driver
- */
-
- full_driver = 0;
-
- for (i = 0; i <= OPT_LAST; i++)
- if (can_select_option(i))
- {
- if (!(selected_options & B(i))) /*
- * Not selected yet
- */
- if (!hw_table[i].verify)
- {
- if (hw_table[i].alias)
- selected_options |= B(hw_table[i].alias);
- else
- selected_options |= B(i);
- } else
- {
- int def_answ = hw_table[i].default_answ;
-
- if (think_positively(questions[i], def_answ, help[i]))
- if (hw_table[i].alias)
- selected_options |= B(hw_table[i].alias);
- else
- selected_options |= B(i);
- }
- }
- }
-
- if (selected_options & B(OPT_SB))
- {
- if (think_positively(
- "Support for the SG NX Pro mixer", 0,
- "Enable this if you want to support the additional mixer functions\n"
- "provided on Sound Galaxy NX Pro sound cards.\n"))
- printf("#define __SGNXPRO__\n");
- }
- if (selected_options & B(OPT_SB))
- {
- if (think_positively("Support for the MV Jazz16 (ProSonic etc.)", 0,
- "Enable this if you have an MV Jazz16 or ProSonic sound card.\n"))
- {
- if (think_positively("Do you have SoundMan Wave", 0,
- "Enable this option of you have the Logitech SoundMan Wave sound card.\n"))
- {
- printf("#define SM_WAVE\n");
-
- midi0001_again:
- if (think_positively(
- "Do you have access to the MIDI0001.BIN file", 1,
- "The Logitech SoundMan Wave has a microcontroller which must be\n"
- "initialized before MIDI emulation works. This is possible only if the\n"
- "microcode file is compiled into the driver.\n"))
- {
- char path[512];
-
- fprintf(stderr,
- "Enter full name of the MIDI0001.BIN file (pwd is sound): ");
- scanf("%s", path);
- fprintf(stderr, "including microcode file %s\n", path);
-
- if (!bin2hex(path, "smw-midi0001.h", "smw_ucode"))
- {
- fprintf(stderr, "Couldn't open file %s\n",
- path);
- if (think_positively("Try again with correct path", 1,
- "The specified file could not be opened. Enter the correct path to the\n"
- "file.\n"))
- goto midi0001_again;
- } else
- {
- printf("#define SMW_MIDI0001_INCLUDED\n");
- printf("/*build bin2hex %s smw-midi0001.h smw_ucode */\n", path);
- }
- }
- }
- }
- }
- if (selected_options & B(OPT_SB))
- {
- if (think_positively("Do you have a Logitech SoundMan Games", 0,
- "The Logitech SoundMan Games supports 44 kHz in stereo while the\n"
- "standard SB Pro supports just 22 kHz stereo. You have the option of\n"
- "enabling SM Games mode. However, enable it only if you are sure that\n"
- "your card is an SM Games. Enabling this feature with a plain old SB\n"
- "Pro will cause troubles with stereo mode.\n\n"
- "DANGER! Read the above once again before answering 'y'\n"
- "Answer 'n' if you are unsure what to do!\n"))
- printf("#define SM_GAMES\n");
- }
- if (selected_options & B(OPT_AEDSP16))
- {
- int sel1 = 0;
-
- if (selected_options & B(OPT_SB))
- {
-
- if (think_positively(
- "Do you want support for the Audio Excel Sound Blaster Pro mode",
- 1,
- "Enable this option if you want the Audio Excel sound card to operate\n"
- "in Sound Blaster Pro mode.\n"))
- {
- printf("#define AEDSP16_SBPRO\n");
- sel1 = 1;
- }
- }
- if ((selected_options & B(OPT_MSS)) && (sel1 == 0))
- {
-
- if (think_positively(
- "Do you want support for the Audio Excel Microsoft Sound System mode",
- 1,
- "Enable this option if you want the Audio Excel sound card to operate\n"
- "in Microsoft Sound System mode.\n"))
- {
- printf("#define AEDSP16_MSS\n");
- sel1 = 1;
- }
- }
- if (sel1 == 0)
- {
- printf("invalid_configuration__run_make_config_again\n");
- fprintf(stderr, "ERROR!!!!!\nYou must select at least one mode when using Audio Excel!\n");
- exit(-1);
- }
- if (selected_options & B(OPT_MPU401))
- printf("#define AEDSP16_MPU401\n");
- }
- if (selected_options & B(OPT_PSS))
- {
- genld_again:
- if (think_positively("Do you wish to include an LD file", 1,
- "If you want to emulate the Sound Blaster card and you have a DSPxxx.LD\n"
- "file then you must include the LD in the kernel.\n"))
- {
- char path[512];
-
- fprintf(stderr,
- "Enter the path to your LD file (pwd is sound): ");
- scanf("%s", path);
- fprintf(stderr, "including LD file %s\n", path);
-
- if (!bin2hex(path, "synth-ld.h", "pss_synth"))
- {
- fprintf(stderr, "couldn't open `%s' as the LD file\n", path);
- if (think_positively("try again with correct path", 1,
- "The given LD file could not opened.\n"))
- goto genld_again;
- } else
- {
- printf("#define PSS_HAVE_LD\n");
- printf("/*build bin2hex %s synth-ld.h pss_synth */\n", path);
- }
- } else
- {
- FILE *sf = fopen("synth-ld.h", "w");
-
- fprintf(sf, "/* automatically generated by configure */\n");
- fprintf(sf, "unsigned char pss_synth[1];\n"
- "#define pss_synthLen 0\n");
- fclose(sf);
- }
- }
- if (selected_options & B(OPT_TRIX))
- {
- hex2hex_again:
-
- if (think_positively("Do you want to include TRXPRO.HEX in your kernel",
- 1,
- "The MediaTrix AudioTrix Pro has an on-board microcontroller which\n"
- "needs to be initialized by downloading the code from the file TRXPRO.HEX\n"
- "in the DOS driver directory. If you don't have the TRXPRO.HEX file handy\n"
- "you may skip this step. However, the SB and MPU-401 modes of AudioTrix\n"
- "Pro will not work without this file!\n"))
- {
- char path[512];
-
- fprintf(stderr,
- "Enter the path to your TRXPRO.HEX file (pwd is sound): ");
- scanf("%s", path);
- fprintf(stderr, "including HEX file `%s'\n", path);
-
- if (!hex2hex(path, "trix_boot.h", "trix_boot"))
- goto hex2hex_again;
- printf("/*build hex2hex %s trix_boot.h trix_boot */\n", path);
- printf("#define INCLUDE_TRIX_BOOT\n");
- }
- }
- if (selected_options & B(OPT_MSS))
- {
- if (think_positively("Support for builtin sound of Compaq Deskpro XL", 0,
- "Enable this if you have Compaq Deskpro XL.\n"))
- {
- printf("#define DESKPROXL\n");
- }
- }
- if (selected_options & B(OPT_MAUI))
- {
- oswf_again:
- if (think_positively(
- "Do you have access to the OSWF.MOT file", 1,
- "TB Maui and Tropez have a microcontroller which needs to be initialized\n"
- "prior use. OSWF.MOT is a file distributed with card's DOS/Windows drivers\n"
- "which is required during initialization\n"))
- {
- char path[512];
-
- fprintf(stderr,
- "Enter full name of the OSWF.MOT file (pwd is sound): ");
- scanf("%s", path);
- fprintf(stderr, "including microcode file %s\n", path);
-
- if (!bin2hex(path, "maui_boot.h", "maui_os"))
- {
- fprintf(stderr, "Couldn't open file %s\n",
- path);
- if (think_positively("Try again with correct path", 1,
- "The specified file could not be opened. Enter the correct path to the\n"
- "file.\n"))
- goto oswf_again;
- } else
- {
- printf("#define HAVE_MAUI_BOOT\n");
- printf("/*build bin2hex %s maui_boot.h maui_os */\n", path);
- }
- }
- }
- if (!(selected_options & ANY_DEVS))
- {
- printf("invalid_configuration__run_make_config_again\n");
- fprintf(stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n*** You need to enable support for at least one device ***\n\n");
- exit(0);
- }
- for (i = 0; i <= OPT_LAST; i++)
- if (!hw_table[i].alias)
- if (selected_options & B(i))
- printf("#define CONFIG_%s\n", hw_table[i].macro);
- else
- printf("#undef CONFIG_%s\n", hw_table[i].macro);
-
- printf("\n");
-
- i = 0;
-
- while (extra_options[i].name != NULL)
- {
- if (selected_options & extra_options[i].mask)
- printf("#define CONFIG_%s\n", extra_options[i].name);
- else
- printf("#undef CONFIG_%s\n", extra_options[i].name);
- i++;
- }
-
- printf("\n");
-
- ask_parameters();
-
- printf("#define SELECTED_SOUND_OPTIONS\t0x%08lx\n", selected_options);
- fprintf(stderr, "\nThe sound driver is now configured.\n");
-
- if (!old_config_used)
- {
- char str[255];
-
- sprintf(str, "Save copy of this configuration to `%s'", oldconf);
- if (think_positively(str, 1,
- "If you enable this option then the sound driver configuration is\n"
- "saved to a file. If you later need to recompile the kernel you have\n"
- "the option of using the saved configuration.\n"))
- {
- char cmd[200];
-
- sprintf(cmd, "cp local.h %s", oldconf);
-
- fclose(stdout);
- if (system(cmd) != 0)
- perror(cmd);
- }
- }
- exit(0);
-}
-
-int
-bin2hex(char *path, char *target, char *varname)
-{
- int fd;
- int count;
- char c;
- int i = 0;
-
- if ((fd = open(path, 0)) > 0)
- {
- FILE *sf = fopen(target, "w");
-
- fprintf(sf, "/* automatically generated by configure */\n");
- fprintf(sf, "static unsigned char %s[] = {\n", varname);
- while (1)
- {
- count = read(fd, &c, 1);
- if (count == 0)
- break;
- if (i != 0 && (i % 10) == 0)
- fprintf(sf, "\n");
- fprintf(sf, "0x%02lx,", c & 0xFFL);
- i++;
- }
- fprintf(sf, "};\n"
- "#define %sLen %d\n", varname, i);
- fclose(sf);
- close(fd);
- return 1;
- }
- return 0;
-}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov